Kangaroo K8805 - Page 15

Assembly InstructionsKangaroo
15
h2
3.5x14 Screw x12
Hinge x4
s1
Magnet Catch
Plate x2
m
Alignment Pin x2
s4
Part 3: Top, Support Leaf and Quilt Panel
Attach h2 Butt Hinges to Panels O3 and O4 using s1 Screws.
Attach m Magnet Catch Plates to the underside of Panels O3 and O4 using s2 Screws.
Screw s4 Alignment Pins into the pre-drilled hole in the top of Panels O3 and O4.
3x14 Screw x4
s2
s4
s1
h2
O4
O3
m
s2