User Manual: Kangertech Subox Mini Kit
5
Assembling the Kangertech Box Mod
The Kangertech Box Bod controls the vapor production and powers the atomizer. The box mod
contains the battery and the controls for the device. Batteries are not included.
Equipment Required
• Kangertech Box Mod
• Assembled Kangertech Subohm Clearomizer
• One 18650 Battery (not included)
Box Mod Parts
Figure 4 illustrates the different parts of the Kangertech Box Mod.
Figure 4. Kangertech Box Mod
To assemble the box mod, follow these instructions.
Follow the instructions to assemble the box mod.
1. Remove the battery compartment cover and insert the 18650 battery (not included).
2. Press the Unit Power Switch (Figure 4, 2) five times.
3. The LCD Display (Figure 4, 3) will read “Kangertech”. The unit is now powered on.
4. Screw the assembled clearomizer base into the connection on the top of the box mod.
2. Atomizer Power/Unit Power Switch
4. Voltage/Wattage Controls
6. Clearomizer connection
To Next Page
