User Manual: Kangertech Subox Mini Kit
7
Filling the clearomizer, continued.
Figure 6. Disassembly
4. Place the inverted tank on a flat surface covered by a paper towel.
5. Using an eyedropper or the dripper on the E-juice container, carefully add E-juice to the
tank. (Figure 7)
Figure 7. Filling the tank
6. Screw the base back onto the tank.
7. Check for leaks around the base and the tank.
Tip: If there are any leaks, wipe the threads with a damp paper towel and screw the base
back into the tank.
8. Replace the drip tip by pressing it firmly back into the clearomizer.
9. Wipe off any spilt E-juice off the clearomizer with a paper towel and warm water.
The clearomizer will now be full and ready for use with a variable voltage mod in the production
of vapor.
• Drip between the tank and the
airflow tube.
• Do not fill past the line
indicated on the airflow tube.
To Next Page
