To Next PageTo Next PageWhat causes printing failure in Kanomax Measuring Instruments?
If you are experiencing a printing failure with your Kanomax Measuring Instruments, open the printer cover and confirm there is no ejected paper caught inside the printer. Also, if a red mark appears on the edges of the paper, install a new printing paper. Finally, the batteries may be low, so turn the power OFF and replace them.
What does “E--9” mean on Kanomax Measuring Instruments?
If the Kanomax Measuring Instruments displays “E--9” on the screen, the ROM Cassette may not be installed. If the ROM Cassette is already installed, turn the power OFF and inspect to ensure ROM is properly seated.
What does “E--1” mean on my Kanomax Measuring Instruments?
If the Kanomax Measuring Instruments displays “E--1” on the screen, check to ensure printer paper is properly set in the roller.
Why are the printed characters too light or faint on my Kanomax ANEMOMASTER?
If the printed characters are too light or faint on your Kanomax Measuring Instruments, the batteries may be low. Turn the power OFF and replace the batteries.
What does it mean when my Kanomax ANEMOMASTER Measuring Instruments displays “E--2”?
If the Kanomax Measuring Instruments displays “E--2” on the screen, it could be due to a low battery or the printer head overheating from continuous use. Turn the power OFF and replace the batteries. If that doesn't work, stop printing temporarily and allow the printer to cool.
Why does nothing appear on the screen when the power is turned ON on my Kanomax ANEMOMASTER?
If nothing appears on the screen when the power is turned ON for your Kanomax Measuring Instruments, the batteries may be low. Turn the power OFF and replace the batteries.
What to do if nothing appears on the screen after new batteries are installed in my Kanomax Measuring Instruments?
If nothing appears on the screen of your Kanomax Measuring Instruments after installing new batteries, the batteries may be installed with incorrect polarity. Turn the power OFF and install the batteries correctly.
Why does my Kanomax ANEMOMASTER display “E--0”?
If the Kanomax Measuring Instruments displays “E--0” on the screen, the batteries may be low. Turn the power OFF and replace the batteries.
General| Operating Temperature | 0 to 50 °C |
|---|---|
| Storage Temperature Range | -20 to 60 °C |
| Probe Length | 300 mm |
| Resolution | 0.01 m/s |
| Response Time | 1 s |
| Display | LCD |
| Weight | 300 g |
| Functions | Velocity, Temperature |
