To Next PageTo Next Page
Need help?Do you have a question about the kansai TSK-42 and is the answer not in the manual?
Secure piping, use gradual curves, and apply air leakage prevention tape.
Connect power supply and ground with qualified technicians using specified wiring.
Use commercial 50/60Hz sine wave power; avoid distorted waves from frequency devices.
Execute grounding, block power during work, and avoid socket connections.
Overheat detection due to high internal temp or sensor burnout; includes causes and return methods.
Warnings for outlet/inlet temp limits, sensor burnout, and internal temperature issues.
Warning for blower overload, overcurrent, or lock, including common causes.
General