●
・
《
Main cause
》
lease confirm the rating frequency. And ,
source power supply and the breaker of this
machine are turned OFF at first and are turned
ON again.
Attention : Please block the source power supply (factory power supply) without fail when the
wiring is confirmed and readjusted at the time of abnormal.
－１３－
8-4
Other warnin
Frequency warning (Only TSK-52HT, TSK-62 - 132)
"SYS" is flickered to HOT-AIR TEMP., "ALM" to
SETTING TEMP. in the case that the frequency that
is supplied from the primary power supply exceeded
±
3Hz of the ratings. And, all the operation stop.
Unsupply of rating frequency by the generator
etc. is used to the primary power supply.
《
Return method
》
To Next Page
Loading...
