Connecting Bluetooth
Bluetooth
®
Operation
1. We recommend keeping a maximum distance of 10 meters between the speaker and
your device. The best signal delity is within this range.
2. Take note of the following behavior and functionality during Bluetooth operation. When
you are successfully connected, the Blue LED will be lit solid, and your device will show
as connected to ‘ORA by Kanto’.
• The connection does not remain active while in other inputs.
3. ORA speakers feature a Bluetooth Pairing button on the back of the active speaker
(right) to quickly disconnect a paired device and allow a second device to pair with the
speaker.
• Press the Bluetooth Pairing button to disconnect a paired device.
• Follow the pairing instructions to pair another device.
Bluetooth
®
Pairing
ORA features Bluetooth 5.0 and can be paired with many devices for wireless audio
playback from your phone, smart home device or tablet. Pairing is easy.
1. Press the volume knob and cycle through the inputs until the status light is blue. The
Bluetooth LED (blue) will ash to indicate that ORA is in pairing mode. If the light is
solid, then the ORA is already connected to a device. If you wish to connect to another
device, press the Bluetooth pairing button ( ) on the back of the ORA to put it in pairing
mode.
2. Enable your Bluetooth device to search for a new device to pair with. Select ‘ORA by
Kanto’ from the list of Bluetooth devices available for pairing.
7
To Next Page
Loading...
