Need help?Do you have a question about the Kanto YU6MW and is the answer not in the manual?
General| Type | Powered Bookshelf Speakers |
|---|---|
| Amplifier Type | Class D |
| Nominal Impedance | 4 Ohms |
| Frequency Response | 50Hz - 20kHz |
| Standby Power Consumption | < 0.5W |
| Color | Matte White |
| Woofer | 5.25-inch Kevlar |
| Tweeter | 1 inch Silk Dome |
| Inputs | RCA, Optical, Bluetooth |
| Outputs | Subwoofer |
| Bluetooth Version | 4.0 |
| Input Voltage | 100 - 240V AC |
| Amplifier Power | 140W (70W per channel) |
Provides essential safety warnings and precautions for operating the YU6 speakers.
Details the functions of each button on the YU6 remote for playback and system control.
Instructions for connecting the active and passive speakers using the provided cable.
Steps for connecting the power cord and important safety notes during setup.
Instructions for connecting devices via AUX, RCA, and Optical inputs.
Step-by-step guide for pairing Bluetooth-enabled devices with the YU6 speakers.
Details on wireless audio streaming, connection management, and reconnection behavior.
Solutions for issues where speakers have no power or lights are not illuminated.
To Next Page
