Kanto YU Passive 4 User Manual

Supporting your digital lifestyle
™
English
User Manual
YU Passive Speakers
Thank you for choosing YU Passive speakers, designed by Kanto in Canada. We recommend you
read these instructions carefully before using the speakers, and keep them for future reference.
Kanto cannot be liable for damage or injury caused by incorrect setup or use of this product.
These speakers were carefully tested and inspected during production, and before packaging
and shipping. After unpacking, please check for any damage. It is rare that a unit is damaged
during shipping, but if this happens contact your retailer immediately. You can also call Kanto
directly at 1-888-848-2643 or email support@kantoliving.com.
Introduction
What's in the Box?
YU Passive
Speakers
User
Manual
x8
Self-Adhesive
Rubber Feet
x2

Kanto YU Passive 4 Specifications

General

Type	Passive Bookshelf Speakers
Frequency Response	60 Hz - 20 kHz
Impedance	6 Ohms
Power Handling	70W RMS
Woofer Size	4 inches
Tweeter Size	1 inch

Summary

Introduction

What's in the Box?

Setting Up Your Speakers

Conventional Connection

How to connect speakers to amplifier using speaker wire, ensuring correct polarity.

Amplifier Requirements

Power handling and impedance specs for YU Passive 4" and 5.25" models.

Specifications

YU Passive 4 Specifications

Detailed technical specifications for the YU Passive 4" speakers.

YU Passive 5.25 Specifications

Detailed technical specifications for the YU Passive 5.25" speakers.

Important Safety Precautions

Limited Warranty