EasyManua.ls Logo

Kanto SYD - Introduction; Whats In the Box?

Kanto SYD
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Introduction
Thank you for choosing a SYD Powered Speaker, designed by Kanto in Canada. SYD outputs
140W Peak power for remarkably bold and clean sound. Excellent sensitivity and frequency
response provide deep thumping lows and clear, scintillating highs. SYD is an amazingly
exible speaker system that can accept four input sources and connect to a subwoofer for
enhanced low frequency response. Additionally, it is equipped with the latest Bluetooth
technology and a USB port for charging your devices. SYD has a universal input power supply
and can be used worldwide from 110V AC to 240V AC.
We recommend you read all instructions carefully before using the system and keep them for
future reference. Kanto cannot be liable for damage or injury caused by incorrect setup or
use of this product.
This powered speaker system was carefully tested and inspected during production,
and before packaging and shipping. After unpacking, please check for any damage. It
is rare that a unit is damaged during shipping, but if this happens contact your retailer
immediately. You can also contact Kanto directly using one of the methods below.
What’s In the Box?
SYD Speaker
SYD Stand
User
Manuals
x3
SYD
Remote
x2
3.5 mm cable
AUX
‘AAA’
Batteries
Power
Cord
Email: support@kantoliving.com
Toll Free: US & Canada: 1-888-848-2643 | UK: +44 800086999
AUX
RCA OPT
BALANCE
BASS TREBLE

Related product manuals