Need help?Do you have a question about the Kantronics KPC-1 and is the answer not in the manual?
Guidelines for minimizing radio frequency interference in electronic equipment installations.
Establishing serial data communication between the TNC and a computer.
Details on connecting the TNC to a computer using appropriate serial cables.
Explanation of various serial port pin functions for TNC communication.
Adjusting VHF and HF AFSK output levels on the KAM via jumpers.
Configuring KPC-4 HF AFSK output levels using specific jumpers.
Adjusting AFSK output levels on KPC-2 and KPC-1 using jumpers.
Setting KPC-2400 AFSK output level using a specific jumper.
Troubleshooting TNC connectivity, transmission, and mode issues.
General| Modulation Type | FSK |
|---|---|
| Interface | RS-232 |
| Power Supply | 12V DC |
| Processor | Z80 |
| Type | Packet Radio Modem |
| Operating Modes | Packet |
| Baud Rate | 300 |
To Next Page
