Kantronics KPC-2 - User Manual

KAM
KPC-4
KPC-2400
KPC-2
KPC-1
Installation
Manual
Version 3.0 Sept. 12, 1991
RF Data Communications Specialists
1202 E. 23rd Street, Lawrence, Kansas 66046
Order number (913) 842-7745
Service number (913) 842-4476
9 am - noon, 2 pm - 5 pm Central Time, Monday-Friday

Summary

Radio Frequency Interference Statement

Precautions

Connecting the TNC to Your Computer

TNC to Computer Connection Setup

Establishing serial data communication between TNC and computer.

TNC to Computer Cable Wiring

Details on connecting TNC to computer serial ports.

Connecting Your Radios

DB-9 Radio Connector Pinout

Pinout and connection details for DB-9 radio interface.

8-Pin DIN Radio Connector for KAM HF

Pinout and connection details for 8-pin DIN HF radio interface.

5-Pin DIN Radio Connector for KPC-1

Pinout and connection details for 5-pin DIN radio interface.

AFSK Output Level Adjustment

Interfacing Hand-Held Radios

Assembly and Disassembly of the TNC

Hard Reset Procedure

Calibration and Equalization

Watch Dog Timers

Dumb Modem Mode Operation

Performing a Loop-Back Test

Sample Terminal Programs

Specifications

Kantronics KPC-2 Specifications

General

Modulation Type	FSK
Power Supply	12 VDC
Weight	1.5 lbs
RAM	32 KB
Interface	RS-232
Baud Rate	1200
Connectors	DB25
Processor	Z80
Type	Packet Radio
Memory	32 KB RAM