Need help?Do you have a question about the Kaon AR3030W and is the answer not in the manual?
General| Brand | Kaon |
|---|---|
| Model | AR3030W |
| Category | Wireless Access Point |
| Language | English |
Explains conventions used in the guide, including terms like AR3030W and icons.
Details the status indicators for the AR3030W device.
Connects the AR3030W to your home gateway or other devices.
Connects the AR3030W to a power outlet.
Facilitates mesh network creation and factory reset.
Describes the LEDs for 2.4GHz, 5GHz, ETH, and MESH network status.
Details the status of the POWER LED.
Covers device interfaces, LEDs, antenna type, data rate, standards, and minimum requirements.
Details security features, advanced functionalities like roaming and QoS.
Outlines dimensions, weight, power adapter requirements, temperature, and humidity limits.
Instructions for downloading and installing the mobile application for setup.
Guidance on reviewing and accepting the terms and conditions for using the service.
Steps to connect the primary AR3030W to the home gateway via the app.
How to scan the QR code or manually connect the AR3030W to your phone.
Selecting the primary AR3030W device from a list after connection.
Instructions for logging into the system using provided credentials.
Steps to add additional AR3030W devices to the existing Wi-Fi network.
Process for connecting secondary AR3030W devices using their QR codes.
Guide on establishing a mesh network connection between AR3030W units.
Monitoring the status, topology, and connected devices of the AR3030W network.
Accessing details, renaming, and managing individual AR3030W units.
Performing an internet speed test to verify performance.
Changing the SSID and password for both 2.4GHz and 5GHz Wi-Fi bands.
Sharing Wi-Fi network credentials with family and friends.
Setting up a separate Wi-Fi network for guests with custom name and password.
Configuring a time schedule for guest Wi-Fi access.
Sharing guest network credentials with visitors.
Option to turn LED lights on or off for all AR3030W devices.
Setting a schedule for the LED lights to blink.
Troubleshooting issues with scanning QR codes for setup.
Connecting AR3030W using its MAC address when QR code fails.
Resolving problems where the primary AR3030W cannot access the internet.
Guidance on connecting secondary AR3030W units to the network.
Steps to resolve issues where the AR3030W is not detected during initial setup.
Troubleshooting connection problems between the mobile device and the Wi-Fi network.
Resolving issues when the mesh network setup process is frozen.
Locating default login credentials and how to perform a factory reset.
Steps to troubleshoot issues where no LED lights are illuminated on the device.
Resolving issues where a phone fails to reconnect after Wi-Fi settings are modified.
Troubleshooting inability to rescan QR codes after changing Wi-Fi name or password.
To Next Page
