Kapego LED 843025 - Master; Slave Function; System Expansion via Master;Slave

Manual
Article No.: 843025
6
7. Master / Slave Function
● The control of the light source will be e󰀨ect via an RF controller and / or via the WiFi app by
using a smartphone or tablet with the WiFi box..
● The signals are sent to the controller via RF or WiFi which acts as a „master controller“.
● From the „master controller“ the signals are transmitted via a Cat 5 cable to the other
controller, these controllers act as a „slave controller“.
● The controller must not be manually congured as master and slave. This is done
automatically when the „master controller“ is connected to the RF controller or Wi app and
the „slave controller“ by association with the Cat 5 cable.
● The max. cable length between two controllers may not exceed 100 m.
● With the Master / Slave function, the system can be expanded without the need to have to
connect to each controller manually.
12/24V DC
Cat 5 / RJ45
Slave
RF
Slave
12/24V DC
Master
12/24V DC
Slave
Slave
WiFi
843154 843154 843154
843109
~ ~