Kappa P507076 - Product Specifications; Whats in the box; Power Supply and Charging

Specificatio
Bluetooth Version: V 5.0 Battery for Earbuds: 45mAh x2, 3.7V
Bluetooth Chipset: BK3266 Charging Time: About 1.5 hours
Driver Unit
Water Proof:
6mm x 2
IPX4 (for earphone
only)
Battery for Charging
Case:
400mAh, 3.7V (3 times
recharge for charging
case)
Working Distance
Range:
10M Charging Time: About 2.5 hours
Frequency Range: 2.4000 - 2.4835GHz
Frequency Response: 20Hz - 20KHz Working Time: Up to 3 hours
Impedance: 32Ohm ± 15% at
1KHz (DC)
Standby Time: About 200 hours
Maximum Radio
Transmit Power:
< 10mW
Using the TWS Bluetooth Earphones
This guideline is provided to help you get started quickly with your wireless stereo earphones; please
read it carefully and save it for future reference.
What’s in the box
1. Bluetooth earphones
2. Charging Case
3. Instruction manual
4. XS / S / M / L Ear tips
5. USB charging cable
Power Supply
• We recommend that you fully charge the battery before using for the first time
• Put the earbuds into charging case for charging.
• Allow about 1.5 hours for a full charge of earbuds.
• Charging case blink white LED when charging, LED will be off when fully charged.
• Plug the Micro USB end of the supplied USB cable into the USB micro port charger connector of
charging case.
• Allow about 2.5 hours for a full charge of charging case. Charging case pulsing white LED when
charging, LED will be solid when fully charged.