7
The Prolaser
®
Vector is powered by 3 AA batteries (included)
or a DC 4.5V transformer (not included).
IMPORTANT
An AC/DC converter can only be used when the laser unit
has rechargeable batteries. Using a converter with non-re-
chargeable batteries can damage the laser and be danger-
ous to the user.
To change the batteries:
1. Slide off the battery compartment cover.
2. Insert 3 new AA batteries of the same brand (regular or
good quality rechargeable), according to the diagram in
the battery compartment.
BATTERY INSTALLATION
To Next Page
Loading...