Kapro Prolaser Vector 888 - Maintenance

10
To properly maintain the Prolaser
®
Vector and ensure the
best functionality:
• Clean the unit with a soft cloth slightly dampened with
soap and water.
Do not use harsh chemicals, cleaning solvents or strong
detergents.
• Keep the aperture of the unit clean by wiping is clean with
a lint-free cloth moistened with isopropyl (rubbing) alcohol.
• Always store in a clean, dry place.
• If the unit gets wet, dry it off with a dry cloth. Do not store
or place the unit in the carrying case until it is completely
dry.
•Donotdrytheunitbyplacingitnexttoanopenreorwith
an electric dryer.
• Store between 14°F - 131°F (-10°C - 55°C)
• Do not drop the unit. Avoid rough handling and constant
vibration.
• Remove the batteries during lengthy periods of non-use.
MAINTENANCE