English12
Charging process
Note
New battery packs are only pre-charged and must be fully charged before first
use.
The display is activated during the first charging process.
New battery packs reach their full capacity after approx. 5 charging and dis-
charging cycles.
Charge battery packs that have not been used for a long time before use.
The battery pack cannot be charged outside the permissible temperature value
range. The battery pack display then shows the temperature symbol.
If the display does not show anything during the charging process, please follow
the notes in the "Troubleshooting" chapter.
Note
The charging current and the necessary charging time is temperature-depend-
ent for safety reasons.
To Next Page
Loading...
