10
5.951-556
• Place the motor housing onto the dirt contai-
ner and close.
• Invert the dirt container.
• Press both steering rollers into the holes provi-
ded until they latch into position.
• Push the axle of the wheels into the guide.
To do this, first push the bearing disks to the
outside left and right to the wheels.
If necessary, push back the parking brake.
Assemble your suction unit as follows.
• Open both container locks and lift off the mo-
tor housing.
3. Assembling for the first time
• To suck dry, push the enclosed paper filter bag
onto the suction neck.
- Hold the filter by the card only.
• Fold the protective card over the filter bag.
To Next Page
Loading...
