Kärcher BDS 33/180 C

Questions and Answers

M
Michael MitchellAug 17, 2025
How to improve cleaning results with a Kärcher BDS 33/180 C?
- R
  Rachel WilsonAug 17, 2025
  If your Kärcher Floor Machine isn't cleaning effectively, there are several things you can try. First, replace contaminated pads and wash them at a maximum temperature of 60 °C. Also, replace worn disc brushes or pads. You might also want to rinse contaminated disc brushes with water. Finally, ensure that the brush, pad, and detergent you're using are suitable for the specific task.
C
Christian DiazAug 19, 2025
Why is my Kärcher BDS 33/180 C vibrating so much?
- D
  davisjodiAug 20, 2025
  If your Kärcher Floor Machine is vibrating strongly, it could be due to several reasons. Start by checking if the disc brush or pad is correctly seated. Next, check the pad attachment. Also, examine the disc brush or driver plate pad for any damage. Finally, try positioning the handle lower with your arms outstretched.
J
Joshua RosarioAug 22, 2025
Why is my Kärcher BDS 33/180 C cleaning result insufficient?
- B
  Brittany BlackAug 22, 2025
  If you're experiencing insufficient cleaning results with your Kärcher Floor Machine, consider the following: Replace contaminated pads and wash them at a maximum temperature of 60 °C. Replace worn disc brush/pad. Rinse contaminated disc brushes with water. Also, check the suitability of the brush/pad and detergent for the specific task.
S
Sherry DavisAug 26, 2025
What to do if my Kärcher BDS 33/180 C vibrates strongly?
- J
  Jay BeasleyAug 26, 2025
  If your Kärcher Floor Machine is vibrating strongly, check that the disc brush/pad is seated correctly and the pad attachment is secure. You might also want to try positioning the handle lower by stretching your arms out.
J
Jerry HernandezAug 28, 2025
How to fix a Kärcher BDS 33/180 C Floor Machine when the pad does not turn?
- R
  Rachel TurnerAug 28, 2025
  If the pad on your Kärcher Floor Machine isn't turning, first reset the fuse of the brush drive. Then, check for any foreign objects blocking the brush or pad and remove them if necessary.
L
Leonard SalazarAug 30, 2025
How to improve the cleaning result of my Kärcher Cleaning Equipment?
- L
  Luis WalkerAug 30, 2025
  If you're experiencing insufficient cleaning results with your Kärcher Cleaning Equipment, there are a few things you can try. First, replace any contaminated pads and wash them at a maximum temperature of 60 °C. You might also need to replace a worn disc brush or pad. Additionally, rinse contaminated disc brushes with water and ensure that the brush, pad, and detergent you're using are suitable for the specific cleaning task.
J
Jason MaynardSep 2, 2025
Why is my Kärcher Cleaning Equipment vibrating so much?
- S
  Stacy ThorntonSep 2, 2025
  If your Kärcher Cleaning Equipment is vibrating strongly, check the following: * Ensure the disc brush or pad is correctly seated. * Verify the pad attachment is secure. * Try positioning the handle lower, with your arms outstretched.
C
Christina GonzalezSep 5, 2025
What to do if the pad does not turn on my Kärcher Cleaning Equipment?
- M
  Maxwell ContrerasSep 5, 2025
  If the pad on your Kärcher Cleaning Equipment isn't turning, first reset the fuse of the brush drive. Also, check if any foreign objects are blocking the brush or pad, and remove them if necessary.
M
michele90Sep 8, 2025
How to improve cleaning results with Kärcher Ultrasonic Jewelry Cleaner?
- N
  Nathan GonzalezSep 8, 2025
  If the cleaning results from your Kärcher Ultrasonic Jewelry Cleaner are not satisfactory, several actions can be taken. First, replace any contaminated pads and wash them at a maximum temperature of 60 °C. Additionally, replace any disc brush or pad that appears worn. You may also rinse contaminated disc brushes with water. Finally, ensure that the brush, pad, and detergent you are using are appropriate for the task.
E
emilybeckSep 12, 2025
Why does my Kärcher Ultrasonic Jewelry Cleaner vibrate so much?
- L
  Lee WatsonSep 12, 2025
  If your Kärcher Ultrasonic Jewelry Cleaner vibrates strongly, make sure the disc brush or pad is correctly seated. Also, check the pad attachment to ensure it's secure. Positioning the handle lower, with your arms outstretched, may also reduce vibrations.