Kärcher BR 40/25 EP Bp User Manual

QUICKSTART
5.964-030.0 08/11
Warning
These are only brief instructions! Please read and comply with these instructions prior to using or servicing your
appliance.
The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dangers
for the operator and other persons.
Start up
1
A
A b
Ep model
A Establish mains contact.
Bp model
A Unplug the charger from the mains.
B Place the mains cable into the storage com-
partment.
2
A
C
b
GB
A Open the cover.
B Fill in the water up to the MAX marking of the
filling level display. Maximum temperature of
the liquid 60°C.
C Pour in detergent.
D Close the lid.
BR/BD 40/25 EP, Bp

Kärcher BR 40/25 EP Bp Specifications

General

Brand	Kärcher
Model	BR 40/25 EP Bp
Category	Floor Machine
Language	English

Summary

Start Up Procedure

Ep Model Connection

Establish mains contact for the Ep model.

Bp Model Charging and Cable Storage

Manage charger and mains cable for Bp model.

Water and Detergent Filling

Fill water and detergent into the machine and close the lid.

Machine Operation

Starting and Selecting Programs

Turn the selector switch and press the control switch to start; choose cleaning programs.

Adjusting Water and Transport Roller

Set water quantity using the regulating button and swivel the transport roller.

Vacuum Bar and Advance Speed Adjustment

Lower the vacuum bar and adjust advance speed for the BD cleaning head.

Finishing Operations

Appliance Shutdown Procedure

Turn off the appliance, manage components, and disconnect the mains cable.

Water Reservoir Draining and Cleaning

Empty and rinse the dirt water and fresh water tanks.

Battery Charging

Charge the battery for the Bp model by inserting the connecting cable plug.

Maintenance and Cleaning

Daily Reservoir Cleaning

Empty and clean the water discharge hose, dirt water tank, and fresh water tank.

Filter and Seal Maintenance

Check fluff filter, clean vacuum lips, suction channel, and reservoir seals.

Scheduled Maintenance Intervals

Perform maintenance tasks based on operating hours.

Troubleshooting Guide

Appliance Start-Up Issues

Address issues with starting the Ep and Bp models, including mains contact and battery.

Performance and Cleaning Problems

Resolve low vacuum, poor cleaning results, and brush operational issues.

Water Quantity and Brush Movement

Troubleshoot insufficient water supply and brushes that do not turn.