EasyManua.ls Logo

Kärcher BR VS 400 User Manual

Kärcher BR VS 400
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
BR VS 400 *USA
5.959 - 333 A2001537 (06/01)
1.139 - 108
1.139 - 308
www.karcher.com
Question and Answer IconNeed help?

Do you have a question about the Kärcher BR VS 400 and is the answer not in the manual?

Kärcher BR VS 400 Specifications

General IconGeneral
Working width400 mm
Brush speed150 rpm
Voltage220 - 240 V
Brush rotation speed150 rpm
Brush width400 mm
Cable length10 m
Frequency50 - 60 Hz

Summary

Product Information and Safety

Important Safety Instructions

Essential safety guidelines to prevent injury and damage during operation.

Grounding Instructions

Requirements for proper electrical grounding to ensure safe operation and shock prevention.

Intended Use

Specifies the designated purpose and applications of the floor cleaner.

Initial Setup and Assembly

Device Elements

Identifies and explains the various components and parts of the floor cleaner.

Installing the Pushing Handle

Step-by-step guide for attaching the pushing handle to the main unit.

Install Rotary Brushes

Instructions on how to correctly fit the rotary brushes onto the drive.

Operation and Controls

Install the Tank

Instructions for placing and securing the cleaning agent and water tank.

Fill the Tank

How to add water and cleaning agent to the tank for operation.

Fitting the Plug

Procedure for connecting the appliance to the power supply.

Set the Splash Guard

How to adjust the splash guard for different cleaning surfaces.

Turning the Pushing Handle

Adjusting the handle position for maneuverability and control.

Releasing/locking the pushing handle

Mechanism for adjusting and securing the handle during operation.

Starting/stopping the rotary brushes

Procedures for engaging and deactivating the brush rotation.

Measuring out the cleaning agent

Dispensing the correct amount of cleaning solution during use.

Steering the cleaner

Techniques for directing and maneuvering the machine during cleaning.

Changing the rotary brushes

Process for replacing worn or different types of brushes.

Working in a lateral direction

Method for cleaning wide areas by moving sideways.

Working in lanes

Technique for cleaning by moving in straight paths or lanes.

Switching off the cleaner

Safe procedures for turning off and securing the appliance.

Cleaning, Care, and Transportation

Each Time After Usage

Steps to perform after each cleaning session for maintenance and upkeep.

Pull out the plug

Safely disconnecting the appliance from the power source.

Emptying the tank

How to drain and clean the water and cleaning agent tank.

Dismantle the rotary brushes

Procedure for removing brushes for cleaning or storage.

Transportation

Guidelines for safely moving the appliance between locations.

Cleaning and care

Recommendations for routine cleaning and maintenance of the unit.

Protection from freezing

Measures to protect the appliance from damage in cold conditions.

Recommended Cleaning Agents and Accessories

Recommended Cleaning Agents

Specific cleaning agents recommended for use with the appliance.

Accessories

List of optional attachments and accessories available for the cleaner.

Troubleshooting and Technical Data

Fault Indications

Common problems and their corresponding solutions or error messages.

Technical Data

Specifications, performance metrics, and dimensions of the appliance.

Spare Parts List

Spare Parts List

Detailed list of all replaceable parts for the BR VS 400.

Related product manuals