Need help?Do you have a question about the Kärcher BR 530 BAT and is the answer not in the manual?
General| Working Width, Brush | 530 mm |
|---|---|
| Battery Voltage | 36 V |
| Brush Speed | 180 rpm |
| Brush Contact Pressure | 25 kg |
| Battery Running Time | Up to 3.5 h |
| Dimensions (L x W x H) | 1, 200 x 530 x 1, 100 mm |
| Operating Time | Up to 3.5 h |
Critical safety instructions, including operating limits and warnings.
Defines the intended applications and restrictions for proper unit operation.
Guidance on the responsible disposal of packaging and old equipment.
Overview of the unit's primary function for wet-cleaning floors.
Detailed diagram identifying all operational controls and unit components.
Explanation of the instrument panel indicators and battery status display.
Step-by-step instructions for safely removing the unit from its packaging.
Procedure for correctly attaching the suction bar and hose.
Guidance on how to install the disc brushes before operation.
Essential safety precautions and steps for installing the batteries.
Detailed charging steps for BR/BD 530 BAT and XL BAT models.
Instructions for refilling non-maintenance-free batteries with distilled water.
List of recommended batteries and chargers for optimal unit performance.
Instructions and precautions for adding detergent to the cleaning solution.
Recommendations for detergents based on specific cleaning applications.
How to drive the unit and adjust its propulsion speed.
Procedure for setting the running gear for transportation or cleaning.
Adjusting water flow for effective cleaning based on dirt levels.
Safe procedure for switching on the brush head motor.
Instructions for lowering the suction bar and its automatic adaptation.
Steps to safely stop operation and switch off the unit.
Procedure for emptying both the dirty and fresh water tanks.
Techniques for rotating and tilting the suction bar for better pick-up.
Routine maintenance checks required after work, monthly, and annually.
Step-by-step guide for replacing worn squeegee blades.
Instructions for removing and installing new roller brushes.
Procedure for removing and installing disc brushes.
Steps to prevent unit damage from freezing temperatures.
Guidelines for securing the unit during transport and removing brushes.
Information on how to obtain a list of available spare parts.
Details on the warranty terms and conditions provided by the manufacturer.
Statement confirming the unit's compliance with EU safety and health directives.
A guide to identifying common unit faults and the steps to resolve them.
List of brush rollers and pads with part numbers for various cleaning tasks.
Details on disc brushes, pads, squeegees, and suction bars with part numbers.
Specifications for power consumption, motor output, and suction performance.
Key physical and performance metrics including weight, noise, and vibration.
To Next Page
