EN | 29
EN
11. AUX Input
You can connect the audio output of an external device such as an MP3 player to this unit to listen to
the sound of that device through the amplier of this music system.
1. To connect the external device please use a standard stereo audio cable (3.5 mm to 3.5 mm
plugs) to connect the headphone out or audio line out of the external device to the AUX input
socket of this unit.
2. Turn on the unit and select AUX mode.
3. Switch the external device (e.g. MP3 player) on.
4. Start playback of the external device and adjust the volume control of the main unit to the desired
level.
5. Remember to switch off the unit when you are nished using the external device.
12. Line Out
This radio provides a Line Out connector to which you can connect external speakers for additional
hearing pleasure. External speakers to be connected must be active type speakers.
13. Headphone Connector
A headphone jack is located at back of the unit. When the unit is powered on and playing music, you
can connect headphones (not included) to the headphone jack for your private listening. Mind the
safety information from page 18 on.
With headphones connected the unit’s speakers are disabled. To listen via the speakers again, discon-
nect the headphones.
To Next Page
Loading...