Kärcher FC 7 Cordless User Manual

10 English
Inserting the waste water tank
1. Place the device in the middle of the
waste water tank so that it is posi-
tioned between the rollers, and then
audibly clicks into place. The posi-
tion of the tank is not important her
e,
as it can be used in both longitudinal
directions in the device.
The waste water tank must sit firmly
in the device.
Filling the fresh water tank
1. Grasp the fresh water tank by the re-
cessed grips on the side, and re-
move it from the device.
2. Open the tank cap and turn it to the
side.
3. Fill the fresh water tank with cold or
lukewarm tap w
ater.
4. If desired, add KÄRCHER detergent
or care agent to the fresh water tank.
ATTENTION
Overdosing or underdosing of de-
tergent or care agent
Can lead to poor cleaning results.
Pay attention to the dosage recom-
mendations for the detergent or care
agent.
5. Close the tank cap.
6. Insert the fresh water tank into
the
device.
The fres
h water tank must sit firmly
in the device.
Operation
General information on
operation
ATTENTION
Moisture
Damage to sensitive floors
Before using the device, check the
floor in an inconspicuous place for wa-
ter consistency.
Do not clean any water-sensitive cov-
erings such as untreated wood or other
porous soft flooring material, as mois-
ture can penetrate and damage the
floor.
b
c
a

Kärcher FC 7 Cordless Specifications

General

Type	Cordless Hard Floor Cleaner
Battery Voltage	25.2 V
Cleaning Width	300 mm
Weight	4.3 kg
Dimensions	310 x 230 x 1210 mm
Water Tank Capacity	400 ml (clean water), 200 ml (dirty water)
Drying Time of Cleaned Floor	2 minutes
Battery Charging Time	4 h
Battery Type	Lithium-ion
Cleaning Performance per Tank Filling	135 m²
Runtime	up to 45 min