What to do if Kärcher Pressure Washer leaks water from pump?
If your Kärcher Pressure Washer is leaking water from the pump, start by checking that all fittings are tight. Also, the thermal protection device may be activated. This device will auto reset, but avoid running the pump for more than 5 minutes without spraying.
Why is my Kärcher Pressure Washer pump so noisy?
If your Kärcher Pressure Washer pump is noisy, it might be sucking air. Check that all hoses and fittings are airtight. Turn off the machine and purge the pump by squeezing the trigger gun until a steady flow of water emerges through the nozzle.
How to fix a leaking garden hose connection on Kärcher Pressure Washer?
To fix a leaking garden hose connection on your Kärcher Pressure Washer, first tighten the fittings. If the leak persists, check for a missing or worn rubber washer and insert a new one.
What to do if Kärcher Pressure Washer spray wand leaks?
If the spray wand on your Kärcher Pressure Washer is leaking, ensure the wand is properly attached to the spray gun. Turn the wand collar clockwise onto the gun threads until tight.
General| Operating Pressure (PSI) | 2800 |
|---|---|
| Engine Displacement (cc) | 196 |
| Pump Type | Axial Cam |
| Hose Length (ft) | 25 |
| Power Source | Gasoline |
| Water Flow (gpm) | 2.0 |
| Inlet Connection | 3/4 in garden hose |
| Nozzles Included | Soap |
To Next Page
