To Next PageTo Next Page
Need help?Do you have a question about the Kärcher HD 5/15 C and is the answer not in the manual?
General| Connected load | 2800 W |
|---|---|
| AC input voltage | 230 V |
| Number of phases | 1 |
| AC input frequency | 50 Hz |
| Maximum pressure | 200 bar |
| Working pressure (max) | 150 bar |
| Cable length | 5 m |
Weight and Dimensions| Depth | 360 mm |
|---|---|
| Width | 380 mm |
| Height | 930 mm |
| Weight | 25200 g |
Defines symbols indicating immediate danger or hazardous situations.
Lists key parts like handle, connections, switches, and indicators.
Follow national rules for fuel spray jets and accident prevention.
Details on overflow valve, pressure switch, and safety catch for user protection.
Verifies the oil level is above the pointers before operation.
Explains symbols displayed on the appliance itself.
Outlines approved applications for low and high-pressure cleaning.
Instructions for mounting nozzles, spray pipes, and hoses.
Steps for winding and managing the high-pressure hose on the drum.
Guidance on correctly attaching and securing the spare high-pressure hose.
Details on proper electrical hookup, including voltage and impedance.
Instructions for connecting the appliance to the water source.
Procedure for drawing water from an external container.
Steps for running the appliance at high pressure.
Guide to choosing the correct nozzle spray pattern for different tasks.
Guidelines for applying and using cleaning agents effectively and safely.
Steps for applying detergent and rinsing off dirt.
Procedures for pausing operation and turning off the appliance.
Instructions for properly storing the unit to prevent damage.
How to protect the appliance from freezing temperatures.
Safety precautions and methods for moving the appliance.
Information on scheduling safety checks and maintenance agreements.
Essential checks to perform before each operation for safety and performance.
Regular cleaning and checks performed on a weekly basis.
Step-by-step guide for draining and refilling engine oil.
Guidance for diagnosing and resolving operational problems.
Steps to check when the appliance fails to start.
Steps to resolve issues with insufficient or absent water pressure.
Addresses problems related to pump leakage and unusual vibrations.
Solutions for when the appliance fails to draw in detergent.
Importance of using manufacturer-approved components for safety and performance.
Information on warranty terms and claiming service.
Declares compliance with EU directives and lists relevant standards.
Details on voltage, power, and water supply requirements.
Information on pressure, flow rate, and detergent suction.
Measured noise and vibration values for the appliance.
Details on oil type, capacity, and physical dimensions.
