EasyManua.ls Logo

Kärcher HDS 1195 S Eco - User Manual

Kärcher HDS 1195 S Eco
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
www.kaercher.com 5.961-306 A2008544 05/04
HDS Super M Eco HDS Super MX Eco
HDS 655 M Eco
HDS 695 M Eco HDS 695 MX Eco
HDS 895 M Eco HDS 895 MX Eco
HDS 1195 S Eco HDS 1195 SX Eco

Other manuals for Kärcher HDS 1195 S Eco

Question and Answer IconNeed help?

Do you have a question about the Kärcher HDS 1195 S Eco and is the answer not in the manual?

Summary

Environmental Protection

Unit Illustration

Operating Controls

Commissioning

Reference to Operating Instructions

Guidance on how numbered items in the manual relate to the unit's components.

Checking Oil Level

Procedure for checking and topping up the engine oil level.

Filling with Scale Inhibitor

Instructions for adding scale inhibitor to prevent heating coil calcification.

Filling with Fuel

Steps for safely filling the fuel tank with the correct type of fuel.

Fill with Cleaning Agent

Guidance on using approved cleaning agents and their application.

Installation and Connection

Installing Handgun (No Hose Reel)

Steps for connecting the handgun to units without a hose reel.

Installing Handgun and Hose Reel

Steps for connecting the handgun and hose reel to the unit.

Mounting Spare High-Pressure Hose

Instructions for attaching a spare high-pressure hose for storage.

Mounting Handle

Procedure for attaching the mounting handle for easier transport or storage.

Water Connection

How to connect the unit to a water supply.

Drawing Water from Tank

Procedure for suctioning water from an open container or tank.

Mains Connection

Operation

Switching On the Machine

Step-by-step guide for starting the unit safely and correctly.

Stopping the Unit Immediately

Actions to take if indicator lamps signal a fault during operation.

Handgun Actuation

How the handgun trigger controls unit operation and restarts the pump.

Bleeding the Pump

Procedure to follow if the high-pressure nozzle does not deliver water.

Setting Cleaning Parameters

Setting Cleaning Temperature

Adjusting the temperature regulator for hot water or steam cleaning.

Setting Operating Pressure and Flow Rate

Adjusting the pressure and flow control for optimal cleaning.

Servopress Control

Using the Servopress control for pressure and temperature adjustments.

Measuring Out Cleaning Agents

Properly dosing cleaning agents for environmental protection and effectiveness.

Intended Use

Applications and recommended uses for the high-pressure cleaner.

Waste Water Containing Mineral Oil

Regulations and precautions for disposing of oil-contaminated wastewater.

Working with High-Pressure Nozzle

Tips on using the high-pressure nozzle and selecting spray angles.

Cleaning Methods

Recommended Nozzles

Overview of available accessory nozzles for different cleaning tasks.

Cleaning Process

Steps for applying cleaning agent and removing dirt with the high-pressure jet.

Operation with Cold Water

Using the unit for rinsing and cleaning light contamination with cold water.

Operation with Hot Water

Guidelines and recommended temperatures for hot water cleaning.

Operation with Steam

Specific instructions and safety precautions for steam cleaning operations.

After Every Operation

Cooling Down the Unit

Procedure to cool the unit after hot water or steam operation.

Flushing the Unit

Rinsing the unit after using cleaning agents.

Stopping Machine

Detailed steps for safely shutting down and disconnecting the unit.

Notes on Hose, Cable, and Frost

Precautions regarding hose kinking, cable handling, and frost protection.

Flue Connection Warning

Safety advice for units connected to a flue, especially in cold temperatures.

Decommissioning

Draining and Antifreeze Flushing

Procedure for draining water and flushing equipment with antifreeze for storage.

Maintenance

Maintenance Intervals

Recommended schedule for routine maintenance tasks.

Maintenance Tasks

Detailed procedures for performing common maintenance jobs.

Cleaning and Filter Maintenance

Clean Strainer in Water Connection

Steps to clean the water inlet strainer.

Clean the Fine Filter

Procedure for cleaning the fine filter.

Clean Strainer in Low Water Protection

How to clean the strainer for the low water protection system.

Clean Filter at Cleaning-Agent Suction Hose

Procedure for cleaning the filter on the cleaning agent suction hose.

Change Oil

Instructions for draining and refilling the unit's oil.

Troubleshooting: Unit Issues

Ready for Working Lamp Out

Diagnosing and resolving issues when the ready lamp is off.

Fuel Indicator Lamp Lit

Troubleshooting when the fuel indicator lamp is illuminated.

Liquid Softener Indicator Lamp Lit

Resolving issues indicated by the liquid softener indicator lamp.

Motor Indicator Lamp Lit

Actions to take when the motor indicator lamp is lit.

Unit Does Not Run

Troubleshooting steps when the unit fails to start or operate.

Troubleshooting: Performance Issues

Unit Does Not Build Up Pressure

Diagnosing and fixing problems with pressure buildup.

Unit Leaking, Water Dripping Out

Identifying and addressing leaks from the unit.

Unit Constantly Switched On;Off

Troubleshooting for frequent cycling of the unit with the handgun closed.

Unit Does Not Draw in Cleaning Agent

Resolving issues preventing the unit from drawing cleaning agent.

Burner Not Ignited

Diagnosing and fixing problems with burner ignition.

Troubleshooting: Settings and Other Issues

Set Temperature Not Attained

Troubleshooting when the unit fails to reach the set temperature.

Unit Needs Service

When to seek professional service for unresolved problems.

Warranty Information

General Notes and Safety Features

Safety Features Overview

Explanation of safety mechanisms like overflow valve and safety valve.

Low Water Protection

How the low water protection prevents burner operation with insufficient water.

Motor Protection Switch

Function of the motor protection switch to prevent overloading.

Switching On Procedures

Notes on voltage drops and mains impedance during startup.

EC Conformity Declaration

Technical Data

Technical Data - Specifications

Mains Connection Specifications

Electrical connection requirements, load, and fuse ratings.

Water Connection Specifications

Water supply requirements, temperature, and flow rates.

Performance Data

Flow rates, operating pressures, and steam data for different models.

Noise Emission and Vibration

Sound power levels and machine vibration ratings.

Fuels and Lubricants

Information on fuel types, oil quantity, and oil grade.

Dimensions and Weights

Physical dimensions and weight of the unit and its components.

Parts List

Kärcher HDS 1195 S Eco Specifications

General IconGeneral
BrandKärcher
ModelHDS 1195 S Eco
CategoryPressure Washer
LanguageEnglish

Related product manuals