Need help?Do you have a question about the Kärcher HDS 798 C and is the answer not in the manual?
Essential precautions for safe operation, including chemical hazards and injection risks.
Proper grounding procedures to prevent electric shock hazards during operation.
Guidelines for disposing of used materials and recycling packaging.
Identification of main parts and controls via figures.
Procedure for checking and filling engine oil, including when to contact service.
Instructions for using scale inhibitor to prevent calcification of the heating coil.
Guidance on filling the fuel tank, warning against running it empty.
Recommendations for using KÄRCHER cleaning agents and avoiding solvents.
Steps to connect the spray lance, nozzle, and high-pressure hose.
Connecting water supply and ensuring proper mains power connection.
Procedure for drawing water from an external tank.
How to start the unit and interpret indicator lamps.
How to set cleaning temperature, operating pressure, and flow rate.
Procedure for setting the correct cleaning agent concentration.
General applications and specific use cases for the unit.
Step-by-step guide for effective cleaning with the unit.
Guidelines for using the unit with cold and hot water.
Specific instructions for steam cleaning, including nozzle and pressure.
Procedure for flushing the unit after using cleaning agents.
Steps for safely stopping the unit and disconnecting power.
Instructions for storing the spray pistol, hose, and cable.
Procedure to drain water to prevent damage from frost.
Guide to flushing the unit with antifreeze for long-term storage.
Scheduled checks and cleaning tasks at different intervals.
Instructions for cleaning the water connection strainer.
Procedure for cleaning the strainer in the low water protection.
Steps to clean the filter in the cleaning agent suction hose.
Detailed steps for draining and refilling the unit's oil.
Troubleshooting common faults indicated by lamps.
Diagnosing and resolving issues with the unit not starting or building pressure.
Identifying and addressing leaks from the unit or high-pressure system.
Troubleshooting why the unit is not drawing in cleaning agent.
Releasing a stuck non-return valve for cleaning agent flow.
Resolving burner ignition problems and water supply issues.
Diagnosing why the unit is not reaching the set temperature.
Details on warranty coverage, claims, and dealer responsibilities.
Description of safety mechanisms like overflow, low water, and motor protection.
Safety regulations and inspection requirements for high-pressure equipment.
Information on boiler regulations and unit compliance.
Specifications for mains connection, load, and water supply.
Data on flow rates, operating pressures, temperatures, and outputs.
Information on fuel type, oil quantity, and oil grade.
Physical specifications including dimensions and tank capacities.
Essential precautions for safe operation, including chemical hazards and injection risks.
Proper grounding procedures to prevent electric shock hazards during operation.
Guidelines for disposing of used materials and recycling packaging.
Identification of main parts and controls via figures.
Procedure for checking and filling engine oil, including when to contact service.
Instructions for using scale inhibitor to prevent calcification of the heating coil.
Guidance on filling the fuel tank, warning against running it empty.
Recommendations for using KÄRCHER cleaning agents and avoiding solvents.
Steps to connect the spray lance, nozzle, and high-pressure hose.
Connecting water supply and ensuring proper mains power connection.
Procedure for drawing water from an external tank.
How to start the unit and interpret indicator lamps.
How to set cleaning temperature, operating pressure, and flow rate.
Procedure for setting the correct cleaning agent concentration.
General applications and specific use cases for the unit.
Step-by-step guide for effective cleaning with the unit.
Guidelines for using the unit with cold and hot water.
Specific instructions for steam cleaning, including nozzle and pressure.
Procedure for flushing the unit after using cleaning agents.
Steps for safely stopping the unit and disconnecting power.
Instructions for storing the spray pistol, hose, and cable.
Procedure to drain water to prevent damage from frost.
Guide to flushing the unit with antifreeze for long-term storage.
Scheduled checks and cleaning tasks at different intervals.
Instructions for cleaning the water connection strainer.
Procedure for cleaning the strainer in the low water protection.
Steps to clean the filter in the cleaning agent suction hose.
Detailed steps for draining and refilling the unit's oil.
Troubleshooting common faults indicated by lamps.
Diagnosing and resolving issues with the unit not starting or building pressure.
Identifying and addressing leaks from the unit or high-pressure system.
Troubleshooting why the unit is not drawing in cleaning agent.
Releasing a stuck non-return valve for cleaning agent flow.
Resolving burner ignition problems and water supply issues.
Diagnosing why the unit is not reaching the set temperature.
Details on warranty coverage, claims, and dealer responsibilities.
Description of safety mechanisms like overflow, low water, and motor protection.
Safety regulations and inspection requirements for high-pressure equipment.
Information on boiler regulations and unit compliance.
Specifications for mains connection, load, and water supply.
Data on flow rates, operating pressures, temperatures, and outputs.
Information on fuel type, oil quantity, and oil grade.
Physical specifications including dimensions and tank capacities.
General| Brand | Kärcher |
|---|---|
| Model | HDS 798 C |
| Category | Cleaning Equipment |
| Language | English |
To Next Page