Why is there no water coming from the spray nozzles of my Kärcher ICC 1 S D Floor Machine?
If there is no water at the spray nozzles, check and top up the water tank. Also, check and clean the water filter. You may also need to check or replace the water pump M2, check the position of the water shutoff valve, and check or replace the solenoid valve Y3.
What to do if the Kärcher ICC 1 S D multifunctional display shows excessive engine coolant temperature?
If the multifunctional display shows excessive engine coolant temperature, you should check the engine coolant level and top it up if necessary. Also, check and adjust the V-belt tension for the alternator and water pump. Inspect the radiator for leaks and clogging, and check or replace the cooling fan motor.
What does it mean when the oil pressure indicator lamp illuminates on my Kärcher Floor Machine?
If the oil pressure indicator lamp illuminates, you should check and top up the engine oil level. Also, check or replace the oil pressure switch S2, its connections, and the lamps.
Why is my Kärcher Floor Machine engine emitting black smoke?
If the engine emits black smoke, you should check and replace the air cleaner element. Also, check the fuel return lines.
What to do if the Kärcher ICC 1 S D Floor Machine engine cannot be shut off?
If the engine cannot be shut off, you should check the engine shutoff control module D2. Additionally, check or replace the ignition switch S1 and the engine shutoff solenoid valve Y1.
How to troubleshoot a Kärcher Floor Machine when the starter fails to turn the engine?
If the starter fails to turn the engine, you should check and replace fuse F1. Also, check the ground connection between the engine and chassis, and inspect the battery G1 for voltage, electrolyte level and density. Furthermore, check and replace the ignition switch S1. You may also need to check the voltage at the starter relay and terminals, and check or replace the starter.
What to do if the starter turns the engine but the Kärcher ICC 1 S D doesn't start?
If the starter turns the engine but it fails to start, you should check the battery voltage. Also, verify the fuel level and top it up if needed. Furthermore, check and replace the fuel filter and air cleaner element. You may also need to check or replace fuses F12 and F1, the glow plug control module D1, the engine shutoff solenoid valve Y1, and the starter drive gear.
Why are the brushes on my Kärcher Floor Machine failing to rotate or rotating too slowly?
If the brushes fail to rotate or rotate too slowly, check the pressure in the working hydraulic circuit and adjust the pressure relief valve.
General| Brand | Kärcher |
|---|---|
| Model | ICC 1 S D |
| Category | Floor Machine |
| Language | English |
Provides an overview of the machine's technical capabilities and design features.
Illustrates and lists the various controls and switches on the operator's console.
Details the indicators and displays on the instrument panel for monitoring machine status.
Explains the operation and components of the machine's sweeping and vacuum collection system.
Describes the water system used for dust suppression and cleaning.
Explains how to adjust and check the machine's sweeping pattern for optimal performance.
Details how to adjust the vacuum intake for proper ground clearance.
Explains how to adjust the drum brakes and notes their operation.
Provides instructions for changing wheels and removing the steering wheel.
Provides important guidelines and procedures for towing and transporting the machine safely.
Covers checking the hydraulic fluid level and topping up the system.
Details the procedure for replacing the hydraulic fluid filter.
Details how to check the hydraulic pressure for the drive system.
Explains how to adjust the pressure relief valve for various hydraulic functions.
Provides instructions for removing and installing the hydraulic pumps.
Details the procedure for removing and installing the impeller fan.
To Next Page