Kärcher K 2.56 M User Manual

English 2
Español 17
Français 32
5.961-731.0 01/07
K 2.56 M

Kärcher K 2.56 M Specifications

General

Brand	Kärcher
Model	K 2.56 M
Category	Pressure Washer
Language	English

Summary

Owner/User Responsibility

Safety Alert Symbols

Important Safety Instructions

General Precautions

Covers essential safety steps like reading instructions, supervision, and awareness.

Injection and Explosion Risks

Details hazards from high-pressure jets and flammable liquids.

Electrical Safety

Focuses on risks related to electrocution, wet hands, and cord conditions.

Product Handling Safety

Addresses gun kickback and the trigger safety lock.

Ground Fault Circuit Interrupter (GFCI) Protection

Water Supply Requirements

Assembly Instructions

Operating Instructions

Initial Setup

Connecting hoses, spray wand, and power supply before operation.

Priming and Starting

Purging air and water, then starting the pressure washer using the trigger.

Using the Accessories

Vario Power Spray Wand

Dirtblaster®

Working with Detergents

Applying Detergent

Detergent Recommendations and Cautions

Shutting Down & Clean-Up

Powering Down

Releasing Pressure and Disconnecting

Winterizing and Long-Term Storage

Care and Maintenance Instructions

Cleaning Tips

Optional Cleaning Accessories

Troubleshooting

Motor Not Starting

Addresses issues with the on/off switch, GFCI plug, power cord, and outlet.

Unit Low Pressure Issues

Covers problems with garden hose size, water supply restriction, and clogged filters.

Output Pressure Variation

Troubleshooting for inconsistent pressure due to water supply, air in pump, or clogged nozzle.

No Detergent Flow

Addresses issues with detergent suction tube connection, thickness, or clogs.

Connection and Component Leaks

Garden Hose Connection Leaks

Fixing leaks caused by loose fittings or missing washers.

Spray Wand Leaks

Resolving leaks from improperly attached spray wands or broken components.

Pump Issues

Noisy Pump

Diagnosing noise from the pump, often related to air in the system.

Water Leaks from Pump

Addressing minor water leaks and worn seals.

Oil Drip

Identifying issues related to damaged or worn oil seals.