EasyManuals Logo

Kärcher K 2 Full Control Original Operating Instructions

Kärcher K 2 Full Control
Go to English
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
– 7
Only use original accessories and spare parts, they en-
sure the safe and trouble-free operation of the device.
For information about accessories and spare parts,
please visit www.kaercher.com.
The warranty terms published by the relevant sales
company are applicable in each country. We will repair
potential failures of your appliance within the warranty
period free of charge, provided that such failure is
caused by faulty material or defects in manufacturing. In
the event of a warranty claim please contact your dealer
or the nearest authorized Customer Service centre.
Please submit the proof of purchase.
Addresses can be found under:
www.kaercher.com/dealersearch
We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements of the EU Directives, both in its basic design
and construction as well as in the version put into circu-
lation by us. This declaration shall cease to be valid if
the machine is modified without our prior approval.
The signatories act on behalf of and with the authority of
the company management.
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Straße 28-40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Accessories and Spare Parts
Technical specifications
Electrical connection
Voltage 220-240
1~50-60
V
Hz
Power consumption 6 A
Protection class IP X5
Protective class II
Mains fuse (slow-blow) 10 A
Water connection
Max. feed pressure 1,2 MPa
Max. feed temperature 40 °C
Min. feed volume 8 l/min
Performance data
Working pressure 7,4 MPa
Max. permissible pressure 11 MPa
Water flow rate 5,5 l/min
Max. flow rate 6,0 l/min
Recoil force of trigger gun 11 N
Dimensions and weights
Length 246 mm
Width 280 mm
Height 586 mm
Weight, ready to operate with acces-
sories
5,1 kg
Values determined as per EN 60335-2-79
Hand-arm vibration value
Uncertainty K
<2,5
0,3
m/s
2
m/s
2
Sound pressure level L
pA
Uncertainty K
pA
75
3
dB(A)
dB(A)
Sound power level L
WA
+ Uncertainty
K
WA
90 dB(A)
Subject to technical changes.
Warranty
EU Declaration of Conformity
Product: High pressure cleaner
Type: 1.673-xxx
Relevant EU Directives
2000/14/EC
2014/30/EU
2006/42/EC (+2009/127/EC)
2011/65/EU
Applied harmonized standards
EN 50581
EN 55014–1: 2006+A1: 2009+A2: 2011
EN 55014–2: 2015
EN 60335–1
EN 60335–2–79
EN 61000–3–2: 2014
EN 61000–3–3: 2013
EN 62233: 2008
Applied conformity evaluation method
2000/14/EC: Appendix V
Sound power level dB(A)
Measured: 88
Guaranteed: 90
Winnenden, 2018/08/01
Chairman of the Board of Management
Director Regulatory Affairs & Certification
11EN

Table of Contents

Other manuals for Kärcher K 2 Full Control

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kärcher K 2 Full Control and is the answer not in the manual?

Kärcher K 2 Full Control Specifications

General IconGeneral
Form factorUpright
Hose length4 m
Power sourceElectric
Water filterYes
Product colorBlack, Yellow
Pressure rangeHigh-pressure
Protection classII
International Protection (IP) codeIPX5
Uncertainty K0.3 m/s²
Maximum flow rate6 l/h
Minimum flow rate5.5 l/h
Sound power level88 dB
Vibration emission2.5 m/s²
Sound pressure level75 dB
Working pressure (max)20 bar
Maximum area performance20 m²/h
Sound power level uncertainty90 dB
Maximum input water temperature40 °C
Fuse10 A
AC input voltage220-240 V
AC input frequency50 - 60 Hz
Power consumption (typical)1400 W
Wash brush-
Weight and Dimensions IconWeight and Dimensions
Depth246 mm
Width280 mm
Height586 mm
Weight4300 g

Related product manuals