EasyManuals Logo

Kärcher K 2 Full Control User Manual

Kärcher K 2 Full Control
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
English 17
Illustrations on Page 3
Illustration
Mount loose parts delivered with appli-
ance prior to start-up.
Park the appliance on an even surface.
Illustration
Pull out the clamp from the trigger gun
and plug the high-pressure hose into
the trigger gun.
Push the clamp in until it locks. Check
the secure connection by pulling on the
high-pressure hose.
Illustration
ATTENTION
Impurities in the water can damage the
high-pressure pump and the accessories.
For protection, the use of the KÄRCHER
water filter (optional accessory, order no.
4.730-059) is recommended.
Environmental protection
The packaging material can be recy-
cled. Please arrange for the environ-
mentally appropriate disposal of the
packaging.
Old appliances contain valuable recy-
clable materials that should be recy-
cled properly. Please arrange for the
environmentally appropriate disposal
of the old devices.
Electrical and electronic devices often
contain components which could poten-
tially pose a danger to human health and
the environment if handled or disposed
of incorrectly. However, these compo-
nents are necessary for the proper oper-
ation of the device. Devices marked with
this symbol must not be disposed of with
regular household rubbish.
Cleaning operations which produce
oily waste water, e.g. engine washes,
underbody washes, may only be car-
ried out using washing stations
equipped with an oil separator.
Work with detergents must only be per-
formed on liquid-tight work surfaces
with a connection to the sewer system.
Do not let release detergent into wa-
ters or earth.
Installation and Startup

Other manuals for Kärcher K 2 Full Control

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kärcher K 2 Full Control and is the answer not in the manual?

Kärcher K 2 Full Control Specifications

General IconGeneral
Form factorUpright
Hose length4 m
Power sourceElectric
Water filterYes
Product colorBlack, Yellow
Pressure rangeHigh-pressure
Protection classII
International Protection (IP) codeIPX5
Uncertainty K0.3 m/s²
Maximum flow rate6 l/h
Minimum flow rate5.5 l/h
Sound power level88 dB
Vibration emission2.5 m/s²
Sound pressure level75 dB
Working pressure (max)20 bar
Maximum area performance20 m²/h
Sound power level uncertainty90 dB
Maximum input water temperature40 °C
Fuse10 A
AC input voltage220-240 V
AC input frequency50 - 60 Hz
Power consumption (typical)1400 W
Wash brush-
Weight and Dimensions IconWeight and Dimensions
Depth246 mm
Width280 mm
Height586 mm
Weight4300 g

Related product manuals