English 7
For more detailed information on
how to assemble this pressure wash-
er, please visit
www.karcherresidential.com/
assembly
STEP 1:
STEP 2:
STEP 3:
Push the high pressure hose into the
trigger gun until it locks audibly.
Note: Make sure the connection nip-
ple is aligned correctly.
Check the secure connection by pull-
ing on the high pressure hose.
Disconnect:
Press the disconnect key on the trig-
ger gun and remove the high pres-
sure hose from the trigger gun.
ASSEMBLY INSTRUCTIONS
Assembly
Connect the high pressure hose to
the hand spray gun
To Next Page
