EasyManua.ls Logo

Kärcher K 7000 G User Manual

Kärcher K 7000 G
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
[ IGmUCHER
Model K 7000 G Po_No,,8,1.o
High Pressure Washer Operator Manual
Overview .................................. 1
Precautions ............................... 1-2
Assembly Instructions ......................... 3
Operating Instructions ....................... 4-5
Using the Accessories ........................ 5
Working with Detergents ....................... 6
Shut Down and Clean-Up ...................... 7
Taking a Break .............................. 7
Winterizing arid Long-Term Storage .............. 7
Cleaning Tips ............................. 8-9
Optional Cleaning Accessories .................. 9
Troubleshooting .......................... 10-11
Specifications
Operating pressure
Water volume
Engine
2500 PSI
2.7 GPM
6.5 HP Briggs & Stratton Intek
Question and Answer IconNeed help?

Do you have a question about the Kärcher K 7000 G and is the answer not in the manual?

Kärcher K 7000 G Specifications

General IconGeneral
BrandKärcher
ModelK 7000 G
CategoryPressure Washer
LanguageEnglish

Summary

Product Specifications

Engine Details

Provides information about the engine, including its horsepower and model.

Critical Safety Warnings

Prohibited Actions

Lists absolute prohibitions for safe operation, including pointing the nozzle, consuming substances, and electrical hazards.

Assembly Instructions

Fluid Checks and Filling

Check engine oil level and fill the gas tank with unleaded gasoline, referring to the engine manual for details.

Operating Instructions

Connecting Hoses and Priming

Connect the high-pressure hose and garden hose, turn on water, and trigger the gun to release trapped air.

Starting the Engine

Set throttle and choke, turn fuel valve on, pull starter handle, and repeat if necessary, releasing pressure via trigger.

Using the Accessories

Safety Warning for Nozzle Use

Never point the spray nozzle at yourself, other persons, or animals to avoid serious injury.

Working with Detergent

Detergent Application Process

Set nozzle to "CHEM", place suction tube in detergent, and apply to surface while engine runs.

Shutting Down and Clean-Up

Securing the System

Turn off the engine, water source, release pressure, disconnect the high-pressure hose, and engage the gun safety lock.

Winterizing and Long-Term Storage

Troubleshooting

Related product manuals