To Next PageTo Next PageWhat does it mean when my Kärcher Lawn Sweeper displays 'Usable sweeping brush
This message appears if the roller brush has reached its wear limit. To maintain good sweeping results, replace the roller brush as soon as possible.
What to do if Kärcher Floor Machine displays 'Charge battery!'?
This message appears if the battery voltage is low. To resolve this, charge the battery.
Why does my Kärcher Floor Machine display 'Dirt pan open!'?
This message appears (low emptying system) as soon as a transport or sweeping program has been selected and at least one waste container is removed. To fix this, lock all waste containers in place and turn the program selector switch to "ON". The message should disappear, and the appliance will be ready for operation.
What to do if Kärcher KM 105/100 R Bp displays 'Red 0/1 switch=0 Operation locked'?
This message appears during operation or start-up if the red main switch is in the "0" position. Set the main switch to “I/ON" to resolve this.
Why does Kärcher Lawn Sweeper display 'Motorhood open!'?
This message appears if the left side cover is not properly locked in place. To fix this, completely close the left cover and lock it in place, then turn the program selector switch to "ON".
What to do if my Kärcher Lawn Sweeper displays 'RBroompos.not ok'?
This message is displayed when the right side brush cannot move to the factory-set end position. To fix this, confirm the message with the OK key (delete), turn the program selector switch to position C (drive), and change to the desired sweeping program again.
What to do if Kärcher Floor Machine displays 'MF-module not ready to use x'?
This message appears if the control panel has no connection to the machine control. Perform a program selector switch reset (OFF position).
What does 'Easy oper.switch must be OFF next' mean on Kärcher KM 105/100 R Bp Floor Machine?
This message appears in connection with message 23. For safety reasons, starting up the appliance requires switching off the program selector switch (OFF position).
What to do if Kärcher KM 105/100 R Bp displays 'RBroompos.not ok'?
This message appears when the right side brush cannot move to the factory-set end position. Confirm the message with the OK key (delete). Turn the program selector switch to position C (drive). Change to the desired sweeping program again.
Why is my Kärcher KM 105/100 R Bp displaying 'High dump tracer stuck! Check it!'?
The function of the two-hand operation button is checked for its safety function when the appliance is switched on. Release the two-hand operation button, then confirm the message with the OK key (delete).
General| Brand | Kärcher |
|---|---|
| Model | KM 105/100 R Bp |
| Category | Floor Machine |
| Language | English |
Lists the Karcher KM 105 and KM 125 series sweeper models.
Step-by-step instructions for setting the language on the KIK (Kärcher Intelligent Key).
Covers general information, environmental protection, warranty, and accessories.
Detailed safety instructions for operation, driving, transport, maintenance, and care.
Explains safety symbols, proper application, foreseeable misuse, and suitable surfaces.
Identifies and describes the various operating controls and functional parts of the machine.
Detailed diagrams and labels for KM 105/100(110) R and KM 125/130 R models.
Detailed diagram and labels for the KM 125/130 R model.
Explains the control panel, language settings, and KIK-key usage.
Details on yellow/grey KIK keys, available menu items, and parameter settings.
Covers KIK-key notes, safety devices, parking brake, and pre-startup checks.
Guidelines for handling, transport, and crucial battery safety information.
Instructions for installing batteries, recommended chargers, and charging procedures.
Covers initial startup, daily checks, driving, sweeping modes, and programme selection.
Procedures for waste container emptying, shutdown, and battery warnings.
Covers transport, storage, shutdown, general care, and maintenance notes.
Details on checking tyres, wheels, drive, seat switch, hydraulic oil, brushes, and sealing strips.
Procedures for checking, cleaning, and replacing the dust filter and adjusting/replacing sealing strips.
Instructions for fuse replacement and general troubleshooting steps.
Explains meanings and corrective measures for plain text and coded error messages.
Provides detailed specifications for machine dimensions, weights, and motor details.
Details on battery, charger, fuses, tyres, working conditions, noise, and vibrations.
Official declarations confirming compliance with EU and UK regulations.
Lists available accessories, including side brushes, roller brushes, and filters, with order numbers.
