To Next PageTo Next PageHow to stop dust from gathering in my Kärcher Floor Machine?
To prevent dust accumulation in your Kärcher Floor Machine, verify the bulk waste flap is working and release the Bowden cable if needed. Inspect the dust filter, cleaning or replacing it as necessary. Empty the waste container and replace the sealing profile if damaged. Check the dust filter seal and inspect the sealing strips for wear, adjusting or replacing them as required.
What to do if the engine is running but my Kärcher Floor Machine is not moving?
If the engine of your Kärcher Floor Machine is running but the machine isn't moving, adjust the Bowden cable of the acceleration drive and check the V-belt.
How to improve the cleaning performance at edges with my Kärcher Floor Machine?
To improve cleaning performance at edges with your Kärcher Floor Machine, adjust the side-brush lowering or replace the side brush. You may also want to lower the side brushes and check the drive belt of the side brush.
Why does my Kärcher Floor Machine stop when climbing a slope?
If your Kärcher Floor Machine stops when climbing a slope, try driving over a path with a lesser slope. Additionally, adjust the Bowden cable of the acceleration drive and check the V-belt.
What to do if the side-brush raising does not function on my Kärcher Floor Machine?
General
