Do you have a question about the Kärcher NT48/1 and is the answer not in the manual?
Model | NT 48/1 |
---|---|
Category | Wet and dry vacuum cleaner |
Container Capacity | 48 l |
Dimensions (L x W x H) | 480 x 480 x 690 mm |
Container material | Plastic |
Number of motors | 1 |
Frequency | 50/60 Hz |
Voltage | 220-240 V |
Hose Length | 2.5 m |
Cable Length | 7.5 m |
Air Flow Rate | 74 l/s |
Standard nominal width | 35 mm |
Included Accessories | Wet suction hose, suction tube, floor nozzle, crevice nozzle, dust bag |
Instructions for recycling packaging material and disposing of old appliances responsibly.
Explanation of danger levels (DANGER, WARNING, CAUTION, ATTENTION) and associated risks.
Defines the intended use for dry/wet cleaning and suitability for commercial applications.
Identification and listing of all physical components of the appliance.
Step-by-step guide for dry and wet vacuum cleaning setup, including filter installation.
Instructions for turning the appliance on and emptying the dirt container.
Details on the clip system for connecting accessories to the suction hose.
Procedures for turning off, unplugging, and cleaning the appliance after use.
Guidelines for storing the appliance safely and precautions for transporting it.
Instructions for essential maintenance tasks like changing the cartridge filter.
Solutions for problems like suction turbine not running or decreased suction capacity.
Guidance on contacting customer service for unresolved malfunctions.
Information on warranty coverage, repair conditions, and how to make a claim.
Recommendations for using manufacturer-approved parts for safe operation.
Statement declaring compliance with relevant EU safety and health requirements.