Kärcher Puzzi 8/1 C Quick Start

QUICKSTART
5.964-158.0 02/12
Warning
These are only brief instructions! Please read and comply with these instructions prior to using or servicing your
appliance.
The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dangers
for the operator and other persons.
Start up
1
A B C A Insert the coupling of the fresh water
hose into the fresh water connection
of the appliance and lock into place.
B Insert the suction hose into the suction
hose connection on the appliance.
2
A B A Connect the fresh water hose to the
elbow of the manual nozzle.
B Connect the suction hose to bender of
the manual nozzle.
Operation
1
A B C A Remove the lid.
B Remove the wastewater container from
the appliance.
C Refill the wastewater container with fresh
water.
2
A B C A Fill in fresh water.
B Fill detergent solution/the tab including i
ts water soluble packaging into the fresh
water reservoir. The fill level must not
exceed the "MAX" mark. After 5 minutes,
the tab will be completely dissolved.
C Insert dirt water reservoir into the appliance
and attach lid.
3
A B C A Press the spray switch to turn on the
detergent pump.
B Press the suction switch to turn on the
suction turbine.
C If the dirt water reservoir is full, switch
off the suction and spray switches.
Puzzi 8/1 C
1EN

Kärcher Puzzi 8/1 C Specifications

General

Type	Drum vacuum
Cleaning type	Wet
Dust capacity	- L
Product color	Black, Grey, Yellow
Dust container type	Bagless
Cord length	7.5 m
Carrying handle(s)	Yes
Maximum area covered	18 m²
Clean water tank capacity	8 L
Dirty water tank capacity	7 L
Airflow	61 l/s
Proper use	Professional
Noise level	- dB
Cleaning surfaces	Carpet, Hard floor
Vacuum air filtering	Water
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Maximum input power	1200 W
Annual energy consumption	- kWh

Weight and Dimensions

Depth	530 mm
Width	330 mm
Height	440 mm
Weight	9800 g