English 23
The cleaning robot does
not clean efficiently or
leaves dust behind
The dust container is full. 1. Empty the dust container, see chapter
Emptying the dust container.
The filter is clogged. 1. Clean the filter, see chapter Cleaning the
filter
A foreign object has become caught in
the brush
1. Clean the brush, see chapter Cleaning the
brush.
2. Clean the side brush, see chapter Cleaning
the side brush.
The cleaning robot does
not continue cleaning
The cleaning robot is in "Do not disturb"
mode.
1. Ensure that the cleaning robot is not in "Do
not disturb" mode.
The cleaning robot is being charged
manually or has been placed in the
charging station.
1. Wait until the cleaning robot is fully
charged.
The cleaning robot is not
returning to the charging
station
Battery is discharged. 1. Manually place the cleaning robot on the
charging station and let it charge complete-
ly.
The cleaning robot is too far away from
the charging station.
1. Move the cleaning robot closer to the
charging station.
2. Manually place the cleaning robot on the
charging station.
Not enough space around the charging
station.
1. Ensure that there is sufficient space
around the charging station, see chapter
Setting up the charging station.
There are too many obstacles around the
charging station.
1. Place the charging station in a more open
area, see chapter Setting up the charging
station.
The cleaning robot remaps its environ-
ment when it has been moved over a
longer distance.
1. Manually place the cleaning robot on the
charging station.
The cleaning robot was not started from
the charging station. In this case, it only
returns to the place from which it was
started.
1. Manually place the cleaning robot on the
charging station.
Fault Cause Rectification
To Next Page
Loading...
Need help?
General
Weight and Dimensions
