Need help?Do you have a question about the Kärcher VAPORAPID 1701 and is the answer not in the manual?
Report any transport damage to the dealer immediately. Dispose of packaging materials responsibly.
Connect the modular accessory plug to the main unit and attach desired accessories to the steam gun.
Remove safety cap, fill boiler with max 2 litres of tap water, and refit cap tightly.
Plug unit in, switch on heater and steam supply. Wait for heater lamp to extinguish.
Turn heater off, steam supply on. Depressurize steam gun, remove safety cap, refill, and refit cap.
Switch off heater and steam supply. Remove modular plug from main unit and unplug from socket.
Turn heater off, stand unit upright, and attach extension tube to retaining bracket for transport.
Store small parts in compartment, wind cable, insert extension tubes into base recesses.
Always test steam resistance on hidden sections of fabric or surfaces before full cleaning.
Regulate steam volume with the handwheel on the steam gun for standard accessories.
Regulate steam flow with the rotary knob on the main unit when using the household iron.
Adjust steam wetness using the VAPOHYDRO rotary knob for optimal cleaning performance.
Shows if operating within the correct temperature range (green area) for optimal results.
Use the steam gun without accessories for deodorising clothing, removing creases, and dusting houseplants.
Use the spot nozzle with attachments for cleaning hard-to-reach areas like corners, joints, and radiators.
Use the floor nozzle with extension tubes for cleaning large washable wall and floor surfaces.
Use the hand nozzle with extension tubes and terry-towelling slip-on for small surfaces and furniture.
Attach the window nozzle to the steam gun to apply steam evenly and squeegee glass surfaces.
Optional accessory for steam-ironing and dry-ironing. Connect to main unit and set temperature controls.
Information on approved accessories like wallpaper remover, rotary nozzle, cloth sets, and descaling liquid.
Descale the boiler regularly based on water hardness. Follow descaling procedure using approved liquid.
Wipe cloths are pre-washed and can be machine-washed at 60°C. Do not use fabric softeners.
Troubleshoot issues like the low-water warning lamp. Contact customer service for other problems.
Maintains boiler pressure at a constant level, switching the heater off at max pressure.
Switches off the heater when water is low, indicated by the red warning lamp.
Switches off the entire unit if the low-water thermostat fails and the cleaner overheats.
Seals the boiler, keeping pressure inside. Features an overpressure valve to release steam if pressure exceeds 5.7 bar.
Details warranty conditions, claims process, and liability limitations based on proper usage.
Appliance construction complies with recycling directives. Proper disposal of packaging is recommended.
Declares conformity with relevant EU safety, health, and EMC directives based on applied harmonised standards.
Report any transport damage to the dealer immediately. Dispose of packaging materials responsibly.
Connect the modular accessory plug to the main unit and attach desired accessories to the steam gun.
Remove safety cap, fill boiler with max 2 litres of tap water, and refit cap tightly.
Plug unit in, switch on heater and steam supply. Wait for heater lamp to extinguish.
Turn heater off, steam supply on. Depressurize steam gun, remove safety cap, refill, and refit cap.
Switch off heater and steam supply. Remove modular plug from main unit and unplug from socket.
Turn heater off, stand unit upright, and attach extension tube to retaining bracket for transport.
Store small parts in compartment, wind cable, insert extension tubes into base recesses.
Always test steam resistance on hidden sections of fabric or surfaces before full cleaning.
Regulate steam volume with the handwheel on the steam gun for standard accessories.
Regulate steam flow with the rotary knob on the main unit when using the household iron.
Adjust steam wetness using the VAPOHYDRO rotary knob for optimal cleaning performance.
Shows if operating within the correct temperature range (green area) for optimal results.
Use the steam gun without accessories for deodorising clothing, removing creases, and dusting houseplants.
Use the spot nozzle with attachments for cleaning hard-to-reach areas like corners, joints, and radiators.
Use the floor nozzle with extension tubes for cleaning large washable wall and floor surfaces.
Use the hand nozzle with extension tubes and terry-towelling slip-on for small surfaces and furniture.
Attach the window nozzle to the steam gun to apply steam evenly and squeegee glass surfaces.
Optional accessory for steam-ironing and dry-ironing. Connect to main unit and set temperature controls.
Information on approved accessories like wallpaper remover, rotary nozzle, cloth sets, and descaling liquid.
Descale the boiler regularly based on water hardness. Follow descaling procedure using approved liquid.
Wipe cloths are pre-washed and can be machine-washed at 60°C. Do not use fabric softeners.
Troubleshoot issues like the low-water warning lamp. Contact customer service for other problems.
Maintains boiler pressure at a constant level, switching the heater off at max pressure.
Switches off the heater when water is low, indicated by the red warning lamp.
Switches off the entire unit if the low-water thermostat fails and the cleaner overheats.
Seals the boiler, keeping pressure inside. Features an overpressure valve to release steam if pressure exceeds 5.7 bar.
Details warranty conditions, claims process, and liability limitations based on proper usage.
Appliance construction complies with recycling directives. Proper disposal of packaging is recommended.
Declares conformity with relevant EU safety, health, and EMC directives based on applied harmonised standards.
General| Brand | Kärcher |
|---|---|
| Model | VAPORAPID 1701 |
| Category | Steam Cleaner |
| Language | English |
To Next Page
