12 English
on the upholstery brush (as shown in
the figure) and then pull the
upholstery brush out of the vacuum.
1. To connect the hand-held vacuum
cleaner to the crevice nozzle or the
two-in-one brush attachment: Align
the circular port of the crevice nozzle
or the two-in-one brush attachment
with the suction port of the hand-held
vacuum cleaner, and then insert it
into position in the direction shown in
the figure.
2. To connect the hand-held vacuum
cleaner to the crevice nozzle or the
two-in-one brush attachment with the
conductive metal tube: Align the
circular port of either the crevice
nozzle or the two-in-one brush
attachment. Insert the attachment
into the connector tube port in the
position shown in the figure until it is
in place.
Crevice Nozzle and
Dusting brush 2 in 1
Upholstery Brush
Release Button
To Next Page
Loading...
