02
BEFORE YOU INSTALL THE CEILING HOOD
14
Installation
Cut out the work surface according to
the sizes shown in the drawings.
Warning: Caution! Before drilling
it is extremely important to check
the wall for hidden pipes, electrical
cables etc using an appropriate
detection device.
WARNING: Use only the same size
of ttings and mounting screws as
recommended in this instruction
manual. Failure to follow these
instructions may result in electrical
hazards.
WARNING: Please follow the Safety
and Electrical Installation sections
at the start of this manual before
connecting this appliance to the
mains supply!
≥550mm
≥650mm
max 1500mm
Diagram shows
minimum distance
between hood & hob
Min. 90mm
To Next Page