23
Connectivity
23
CONNECTIVITY WITH YOUR HOB AND CEILING HOOD
You can link a hob with any hood with RF Technology in our range.
Please contact the service department on 0333 247 1128 for advice if you are unsure.
• Once the ceiling hood and the hob are linked, the hood can be controlled manually or
automatically by pressing the Connectivity Indicator Key to enable or disable the
connection.
• The hob and hood have to be set up to link together.
To achieve this follow the steps for connectivity appropriate to your branded appliance:
Connecting a WRCE90RF Ceiling Hood with a Viceroy Hob
Connecting a WRCE90RF Ceiling Hood with a KARLSON Hob
A
B
Ceiling hood and the induction hob must be paired by radio
frequency before remote control can occur. This only needs to be
done once. When connected, the power output of the induction hob
will control the extraction rate of the ceiling hood.
BEFORE YOU START
To Next Page