05
Safety
• Do not install the appliance outdoors in
a damp place or in an area which may be
prone to water leaks such as under or near
a sink unit. In the event of a water leak
aecting the appliance, do not use and
contact customer services to arrange for
inspection.
• Do not use ammable sprays in close
vicinity to the appliance.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualied persons in order
to avoid a safety hazard.
• Please dispose of the packing material
carefully. There is a re risk if cleaning is not
carried out in accordance with
the instructions. Refer to the Care and
Maintenance sections carefully for details
on how to clean and replace the aluminium
and carbon lters (if tted).
• The LED lamps in this appliance are not
replaceable by the consumer. If a lamp fails,
please contact the customer helpline at the
end of Care & maintenance to arrange an
engineer visit.
• Do not use a steam cleaner for care and
maintenance.
• The appliance is not intended to be
operated by means of an external timer or
separate remote control system.
• There shall be adequate ventilation of the
room when the hood is used at the same
time as appliances burning gas or other
fuels. Ensure that the negative pressure of
the installation site does not exceed 4 Pa
(0.04 mbar) to ensure combustion fumes
are not drawn back into the room.
• Do not use the hood if it shows signs of
damage or imperfection. Contact customer
services for assistance.
• The manufacturer declines all liability for
personal or material damage as a result
of misuse or incorrect installation of this
appliance.
• The appliance is for domestic use only as an
extractor hood.
To Next Page
Loading...