38
11.1.9
Headrest setting for Captain Seat
Adjust the height of the headrest from this button under the headrest.
11.2
Positioning belts
The optionally positioning belt can be adjusted in length. To change the setting
simply operate from the tri-slide rim.
If you loosen up the bolts too much, the headrest will fall down. This might
cause a little shock reaction on the user in the wheelchair. It is better to
loosen the bolts bit by bit and every time try to move the headrest. The
friction will keep it stabile. Make sure you hold the headrest with one hand
and loosen the bolt with the other hand.
The positioning belt is not to be used as a safety belt. If the wheelchair is
transported in an occupied position, the user needs to wear a safety belt
which is mounted in the vehicle he or she is transported in.
To Next Page
Loading...
Need help?
General
