41
adjustment bolt in the lowest hole (of the upper frame post) and tighten its
hex nut using two 17 mm wrenches. Use one 17 mm wrench to insert the
threaded stability bolt in the second lowest hole (of the upper frame post
which is also threaded.)
7.15.3 Now you can replace the rear casing and install the seat following the
previous instructions.
8. OPTIONAL ACCESSORIES
8.1 Folding Drink Holder (Figure 8.1)
8.1.1 Attaches to all KARMA scooters.
8.1.2 Collapses and adjusts to the size of the container. (6-10 cm)
8.2 Cane Holder (Figure 8.2)
8.2.1 Suitable for KARMA scooters.
8.3 Sun Canopy (Figure 8.3)
8.3.1 Compatible with all KARMA scooters. (Except KS-333/KS-343)
8.4 Storage Box Kit (Figure 8.4)
8.3.1 Suitable for KARMA scooters and for your convenience on your ride.
Figure 8.1 Figure 8.2 Figure 8.3
Figure 8.4
To Next Page
Loading...