50
Parameter Range Characteristics
Forward Acceleration
1-100
Smaller value yields faster acceleration
and vice versa
Forward Deceleration
1-100
Smaller value yields faster deceleration
and quicker E.M. Brakes and vice versa
Reverse Acceleration
1-100
Smaller value yields faster acceleration
and vice versa
Reverse Deceleration 1-100
Smaller value yields faster deceleration
and quicker E.M. Brakes and vice versa
Forward Speed 0-100
Smaller value yields a lower maximum
speed and vice versa
Reverse Speed 0-100
Smaller value yields a lower maximum
speed and vice versa
Throttle Polarity Yes/No
Yes = right speed lever is forward;
No= left speed lever is forward and vice
versa
Automatic Shutdown Time 0-20 Minutes
1-20 = minutes before shutdown time
0 = no automatic shutdown
Karma's Quality Control team sets the parameters of your central relay box
(controller) for optimum performance within the regulations of EN-12184. These
parameters were double checked by the QC team before your scooter left our
factory
These parameters may be changed to suit certain individuals' specific needs and
requirements. If you need the parameters changed, please contact your dealer who
will put you in contact with our agent. They will know how to use the programmer
properly to "dial in" your scooter for your optimum usage. The programmer's effect
on the performance quality can been seen in the above chart
WARNING
● The safety limits that are set in EN 12184 tables 2 and 3 may be
exceeded by changing the parameters of the controller with a
programmer. It is illegal to exceed these limits. Your Karma agent and
authorized service representative know these limits and will adjust the
performance quality within these limits to assure your safety, if you
require the factory set parameters to be altered.
To Next Page
Loading...
Need help?
General
