14
10.6 Anti-tippers (Optional)
Anti-tippers prevent the wheelchair from tipping backwards.
To equip with anti-tippers, press the spring button before inserting them into
the back of side frame. Ensure the spring button is secure in the fixing hole.
If the anti-tipper is adjustable, the minimum distance between the rear wheel
and the anti-tipper should be more than 5cm and the maximum distance
between the ground and the anti-tipper should be less than 5 cm.
10.7 Seat Upholstery and Backrest Upholstery
Anti-tippers which are incorrectly set or damage can lead to tipping. Please
always check that the anti-tippers are working before using the wheelchair.
Please ask for an authorized dealer when anti-tippers need to be installed
or readjusted.
If the position of the rear wheel axle has been adjusted, please re-evaluate
the wheelchair to check if installing the anti-tippers is necessary.
An activated anti-tipper may bump into the ground when negotiating steps
or kerbs. Therefore, deactivate the anti-tippers if needed.
The distance between the brake shoe and the tire can be adjusted. To
keep the braking efficacy, the adjustment must be carried out by an
authorized dealer.
To Next Page
Loading...
Need help?
General
