15
Seat upholstery or backrest upholstery can be one layer or two layers. It
depends on the specifications of the wheelchair. If the wheelchair is equipped
with the option of two layers of upholstery, the top one can be detached from
the bottom one, which makes it possible to clean the upholsteries.
10.8 Removing and Fitting the rear wheels
10.8.1 Removing the rear wheels
① Release the brakes.
② With one hand, hold the wheelchair upright.
③ With the other, hold the wheel through the external spoke rim around the
wheel hub.
④ Using your thumb, press the removable axle button in the middle. Keep it
pressed and pull the wheel out
10.8.2 Fitting the rear wheels
① With one hand, hold the wheelchair upright.
② With the other hand, hold the wheel through the external spoke rim around
the wheel hub.
③ Using your thumb, press the removable axle button and hold it down.
Then push the axle into the adapter.
④ Release the removable axle button and make sure that the wheel is
secure.
To Next Page
Loading...
Need help?
General
